Industrial 160amps Portable Plasma Cutter CUT160I IGBT Module
Max cutting thickness 60 mm
Suitable for CNC cutting
Features:
1.With digital control port, can provide special signal for CNC
such as 1:1 arc voltage, successful arc strike judgment etc.
2.Pioneer of new arc maintenance technology, with high-frequency
ignition at millisecond level and very less high-frequency
interference.
3.Preset current function, can preset accurate cutting current with
infinite adjusting way to cut different thickness plate.
4.Better external and dynamic characteristic than transformer type
cutting machine, with excellent performance like high successful
rates of arc striking, good arc stiffness, smooth cut.
5.Current rising slowly when arc starting, effectively extend the
life of electrode and nozzle.
6.Very stable cutting current, it doesn't influence the cutting
current when voltage fluctuates within 10%.
7.High duty cycle, no stop at max cutting current.
8.With non-contact arc striking, excellent instant arc strike
function.
9.Arc is strong. It can cut the metal which has rust and paint
conveniently.
10.Less pollution, more economy, effectiveness than flame cutting
machine.
11.Over-current, over-heat, and overload protection system, make
sure the equipment works reliable.
Specification:
| Type | LGK-160I |
| control mode | IGBT inverter |
| Rated input voltage | AC380V |
| Rated input current(A) | 40 |
| Rated input capacity(KVA) | 26.3 |
| Rated output current(A) | 160 |
| Cable cross-sectional area | mains input(mm2) | 8 |
| power output(mm2) | 25 |
| ground wire(mm2) | 4 |
| Rated output voltage(V) | 144 |
| Duty cycle(%) | 100 |
| Rated no-load voltage(V) | 315 |
| Current adjustment range(A) | 40-160 |
| Quality cutting thickness (carbon steel)(mm) | 1~35 |
| Maximum cutting thickness (carbon steel)(mm) | 55 |
| Using plasma gas | Compressed air |
| Gas pressure range(MPa) | 0.4-0.6 |
| Applicable air compressor capacity(m3) | ≥0.6 |
| Arc ignition mode | High pressure non-contact |
| Enclosure rating | IP21S |
| Insulation rating | F |
| Cooling method | Air |
| Power factor | 0.93 |
| Dimensions(mm) | 820*390*940 |
| Host weight(KG) | 70 |
Wide range of application: ARC MMA Welder is suitable for welding
various metal materials, including steel, copper, aluminum, etc.
Good welding effect: By using appropriate electrodes and process
parameters, high-quality welding effects can be achieved with high
weld strength.
Ease of operation: The ARC MMA Welder is simple to operate and does
not require a high skill level, just proper welding skills and
practical experience.
Inexpensive: Compared to other welding equipment, the ARC MMA
Welder is affordable and has low maintenance costs.
Suitable for outdoor welding: ARC MMA Welder can be used by
external power sources such as generators, and is suitable for
welding needs in outdoor environments.
